Steel bar sawing, threading, and polishing production line
The equipment solves the problem that the two ends of the steel bar of the traditional equipment are processed separately so that the efficiency is low. By moving the head and automatically matching the length of the steel bar, both ends of the steel bar are processed at the same time, and the production efficiency is increased to more than 2 times.
The technology of sawing, upsetting, threading and grinding of steel bars realizes the automatic production, improves the automation of the production equipment and reduces the labor force.
Saving space: The threading equipment can be connected with the steel bar shearing and sawing equipment. After the steel bar is cut to the specified length by the cutting equipment, it can be directly put into the threading equipment without taking up space for storage.
Reducing labor: Only one person is needed to operate this equipment, direct transportation, no hoisting and carrying required.
Increasing efficiency: It takes the shortest time to achieve from raw materials to semi-finished product with both ends threaded.
Guaranteed quality：The two processes are closely linked that anomalies can be detected and corrected in time.
Simple operation: The equipment is equipped with humanized operating procedures, providing optional operations. Meanwhile, the combined line can be split to separate equipment and be used individually. Advanced servo control system improves the accuracy of cutting and threading.
Product features
High degree of automation greatly reduces labor intensity.
The whole line is equipped lateral loading device to make the loading easier.
The threading equipment can be connected with the steel bar shearing and sawing equipment. After the steel bar is cut to the specified length by the cutting equipment, it can be directly put into the threading equipment without taking up space for storage.
The technology of threading of steel bars realizes the automatic production, improves the automation of the production equipment and reduces the labor force.
It takes the shortest time to achieve from raw materials to semi-finished product with both ends threaded.
Intelligent feed mechanism automatically feeds the steel bar when the processing is finished and there is no steel bar in the next processing.
Our company was founded in 2016. We focus on the research and development as well as the production of steel bar processing equipment. We can customize the equipment according to the customer's requirements. We offer excellent pre-sale and after-sale services with the engineer to the customer's site to debug the equipment. Our customers are spread all over the world. We deliver our machine both by sea and train. We warmly welcome interested customers to visit and inspect our company and offer your valuable suggestions.
|
Bar processing scope |
Φ16-32 |
|
Sawing mode |
Double-ended high-speed cold sawing |
|
Sawing quantity |
1pc |
|
Bar loading method |
Automatic step feeding |
|
Cutting speed |
3 S/times |
|
Cutting tolerance |
±1 mm |
|
Sawing length |
4000~12000 mm It can be adjusted to a minimum of about 3000. |
|
Switching speed |
5 S |
|
Threading length |
80 mm |
|
Threading diameter |
16~40 mm |
|
Threading speed |
Both ends 10S |
|
Raw material load |
5T |
|
Transport load |
500 kg |
|
Air pressure |
≥0.6 Mpa |
|
Equipment power |
46 KW |
|
Number of operators |
1 Person |
|
Occupied area |
21m×6.5m×1.5m Width includes finished material rack |
Hot Tags: steel bar sawing, threading, and polishing production line, China steel bar sawing, threading, and polishing production line manufacturers, suppliers, factory
