The equipment is an auxiliary production equipment for bar reinforcement to realize the batch size cutting of bars, easily meet the matching of subsequent bending circle, bending arc, bending hoop and other procedures that require the size of bars, widely used in construction, highway, high-speed rail, tunnel, water conservancy, nuclear power plant and other industries.
Video
Parameters
|
Bar diameter (mm) |
10 |
12 |
16 |
20 |
22 |
25 |
28 |
32 |
35 |
38 |
|
Shear bar quantity(HRB400) |
10 |
8 |
6 |
4 |
3 |
3 |
2 |
1 |
1 |
1 |
|
Shear frequency |
20 times/min |
|||||||||
|
Effective blade width |
200mm |
|||||||||
|
Bar transfer speed |
50m/min |
|||||||||
|
Shearable bar length |
750~12000mm |
|||||||||
|
Size error |
±5mm |
|||||||||
|
Minimum manual shear size |
750mm |
|||||||||
|
Minimum automatic shear size |
1200mm |
|||||||||
|
Bar diameter |
Φ10~38mm |
|||||||||
|
Shear line total power |
14KW Including air compressor |
|||||||||
|
Bar receiving bin |
3*2 |
|||||||||
|
Average power consumption |
8KW/H |
|||||||||
|
Total air consumption |
1m³/min |
|||||||||
|
Equipment floor space |
26m×3.2m×1.5m |
|||||||||
Safe Operation Rules
1. Check the wear of the blade, such as serious wear or cutting edge crack, the blade can be changed to use, or replace the blade; Check whether the connecting bolt of the cutting tool is loose; Check the gap between the upper and lower blades. If the gap is too large, shims should be added to adjust.
2. Check whether the air source and power supply are connected.
3. Check whether the electrical circuit switch is normal; Check whether each air pipe is intact.
4. After the power supply, start the hydraulic station oil pump and make it run for 3-5 minutes with empty load.
5. Each single machine test run, and observe its operation.
6. After ensuring that there is no abnormal situation, you can start online.
7. The pressure of the hydraulic station shall be adjusted through the pressure regulator, and the adjustment pressure shall be gradually adjusted from small to large, and the speed shall not be too fast.
Hot Tags: electric rebar cutting line, China electric rebar cutting line manufacturers, suppliers, factory, Electric Steel Bar Shear Line, Electric Reinforcement Shear Line
