The equipment is an auxiliary production equipment for bar reinforcement to realize the batch size cutting of bars, easily meet the matching of subsequent bending circle, bending arc, bending hoop and other procedures that require the size of bars, widely used in construction, highway, high-speed rail, tunnel, water conservancy, nuclear power plant and other industries.
Video
Parameters
|
Bar diameter (mm) |
10 |
12 |
16 |
20 |
22 |
25 |
28 |
32 |
35 |
38 |
|
Shear bar quantity(HRB400) |
10 |
8 |
6 |
4 |
3 |
3 |
2 |
1 |
1 |
1 |
|
Shear frequency |
20 times/min |
|||||||||
|
Effective blade width |
200mm |
|||||||||
|
Bar transfer speed |
50m/min |
|||||||||
|
Shearable bar length |
750~12000mm |
|||||||||
|
Size error |
±5mm |
|||||||||
|
Minimum manual shear size |
750mm |
|||||||||
|
Minimum automatic shear size |
1200mm |
|||||||||
|
Bar diameter |
Φ10~38mm |
|||||||||
|
Shear line total power |
14KW Including air compressor |
|||||||||
|
Bar receiving bin |
3*2 |
|||||||||
|
Average power consumption |
8KW/H |
|||||||||
|
Total air consumption |
1m³/min |
|||||||||
|
Equipment floor space |
26m×3.2m×1.5m |
|||||||||
The bar shear line operation procedure is mainly for the safety, quality and efficiency of the bar shear line operation to ensure the normal operation and achieve the expected objectives. The following is the content of the operation procedure of the steel bar shear line.
First, safety operation procedures
1. The operator must have relevant safe operation skills and experience, and can only operate after qualified training.
2. Before cutting the steel bar, check whether the equipment is running properly and the blade is sharp and free of defects.
3. The operator must wear labor protective equipment correctly, such as safety helmet, gloves, goggles, etc.
4. The operator shall not wear loose clothing and ornaments, and ensure that long hair and other items are properly fixed.
5. In the process of operation, attention should be paid to the safety of the surrounding environment to ensure that no other personnel are in the dangerous area.
6. The operator shall maintain concentration and shall not distract his attention from other irrelevant operations.
7. Before operation, it should be confirmed that there are no flammable and explosive items in the working area, so as to cause an accident.
8. The operator shall not touch or adjust the equipment at will, so as not to cause danger.
Hot Tags: electric steel bar shear line, China electric steel bar shear line manufacturers, suppliers, factory, Electric Reinforcement Shear Line, Electric Steel Bar Shear Line
