Mobile Steel Bar Sawing, Threading, And Polishing Production Line
The equipment solves the problem that the two ends of the steel bar of the traditional equipment are processed separately so that the efficiency is low. By moving the head and automatically matching the length of the steel bar, both ends of the steel bar are processed at the same time, and the production efficiency is increased to more than 2 times.
|
Bar processing scope |
Φ16-32 |
|
Sawing mode |
Double-ended high-speed cold sawing |
|
Sawing quantity |
1pc |
|
Bar loading method |
Automatic step feeding |
|
Cutting speed |
3S/times |
|
Cutting tolerance |
±1mm |
|
Sawing length |
4000~12000mm It can be adjusted to a minimum of about 3000 |
|
Switching speed |
5S |
|
Threading length |
80mm |
|
Threading diameter |
16~40mm |
|
Threading speed |
Both ends 10S |
|
Raw material load |
5T |
|
Transport load |
500kg |
|
Air pressure |
≥0.6Mpa |
|
Equipment power |
46KW |
|
Number of operators |
1 Person |
|
Occupied area |
21m×6.5m×1.5m Width includes finished material rack |
Hydraulic Steel Bar Cutting Line
The equipment is an auxiliary production equipment for bar reinforcement to realize the batch size cutting of bars, easily meet the matching of subsequent bending circle, bending arc, bending hoop and other procedures that require the size of bars, widely used in construction, highway, high-speed rail, tunnel, water conservancy, nuclear power plant and other industries.
CNC steel bar shear line is a kind of automatic integrated machine mainly for large diameter and high strength steel bar cutting equipment, which can automatically cut the steel bar into the required length according to the need, and classify and store the bar. Used in construction, highway and other industries, can complete different lengths of steel bar cutting work, for many specifications, batch of small steel bar cutting work is also applicable.
Common faults and troubleshooting methods
1. The system does not work: the host and the control cabinet are not connected, check whether the connection and cable are firmly connected
2. The system is in the alarm state: check whether the induction position and induction switch are damaged, the emergency stop button is pressed, and the emergency stop control button is restored
3. The actuator does not work: components and valves are damaged or the air pressure is not enough, replace the components or valves, increase the gas pressure, the control line is in poor contact or disconnected, check the faulty line, the induction switch is loose, check the induction switch
4. Motor alarm: overheating, overload, according to the appearance of the signal processing, stop working, cooling or reduce the load
5. Steel bar slip, roller stop: check the connection between the chain and the roller and the bearing rotation
6. The steel bar shear is constant: the blade is damaged. Replace the blade, and the gap between the moving and fixed blades is too large to adjust the gap
Hot Tags: Mobile Steel Bar Sawing, Threading, And Polishing Production Line, China Mobile Steel Bar Sawing, Threading, And Polishing Production Line manufacturers, suppliers, factory
