The equipment is an automatic welding and forming equipment for special-shaped stirrup steel cage. It is a perfect alternative to manual binding of stirrup cages. The minimum main bar spacing can be 100mm, and the maximum can be customized according to customers.

Video

Parameters

Cage length	6m,Customizable
Winding bar type	Stirrup
Main bar type	Bar
Main bar number	3-6pc, Customizable
Diameter of main bar	10-20mm, Customizable
Stirrup diameter	6-12mm, Customizable
Stirrup profile	Triangles, rectangles, special shapes
Stirrup spacing	≥30mm
Minimum distance between main bars	100mm
Welding manner	Gas shielded welding
Gas pressure	≤0.8MPa
Power	14.5KW
Welding power	100KW
Number of operators	1 person
Production efficiency	24 sections/10h,6m/section
Occupied area	16m×3m

Pre-start-up Preparation

Train workers to be familiar with operating procedures, functions of various parts of the system and common sense of maintenance; Check whether the circuit is abnormal, confirm that there is no anomaly after closing the main gate power: check whether the gas pressure meets the requirements; Turn on the power switch on the operating table and check whether the system has alarm display.

Steel cage forming machine is a special equipment for creating steel cage, widely used in construction, Bridges and tunnels and other projects.

Operator Requirement

1. The operator must be professionally trained and familiar with the structure, performance and operation process of the steel cage forming machine.

2. The operator must have certain experience in mechanical operation and be able to independently complete the start-up, debugging and troubleshooting of the machine.

3. The operator must abide by the safety operation procedures and wear the necessary personal protective equipment, such as safety helmet, protective glasses, ear plugs, etc.