The equipment is an automatic welding and forming equipment for special-shaped stirrup steel cage. It is a perfect alternative to manual binding of stirrup cages. The minimum main bar spacing can be 100mm, and the maximum can be customized according to customers.

Video

Parameters

Cage length	6m,Customizable
Winding bar type	Stirrup
Main bar type	Bar
Main bar number	3-6pc, Customizable
Diameter of main bar	10-20mm, Customizable
Stirrup diameter	6-12mm, Customizable
Stirrup profile	Triangles, rectangles, special shapes
Stirrup spacing	≥30mm
Minimum distance between main bars	100mm
Welding manner	Gas shielded welding
Gas pressure	≤0.8MPa
Power	14.5KW
Welding power	100KW
Number of operators	1 person
Production efficiency	24 sections/10h,6m/section
Occupied area	16m×3m

Safety precautions

1. The operator must pay attention during the operation, and it is forbidden to wear headphones, listen to music and other distracting behaviors.

2. The operator shall not extend the hand or other objects into the moving parts of the machine, so as to cause accidental injury to the rabbit.

3. When cleaning the inside of the machine or carrying out maintenance, the machine must be powered off first, and ensure that the machine can be operated before it is stopped.

4. The operator must operate in accordance with the prescribed operation process, and shall not arbitrarily change the parameters of the machine or adjust the structure of the machine.

Troubleshooting

1. In case of machine failure, the operator should stop the machine immediately and carry out the following steps:
2. Check whether the power supply is properly connected to ensure voltage stability.
3. Check whether the lubrication system works normally and add lubricating oil.