Automatic Steel Bar Cage Welder
Small steel cage welding machine with double guns automatic welding is favored by domestic and foreign customers for its excellent performance and stable quality.
The working principle of steel cage welding machine:
According to the construction requirements, the main bar of the steel cage is fixed manually through the corresponding circular hole of the template of the fixed rotating disc to the corresponding hole of the moving rotating disc, and the end of the disc (winding) is welded on a main bar first, and then the winding bar is wound on the main bar by rotating the fixed rotating disc and moving rotating disc (the moving disc is rotated while moving), and welding is carried out at the same time. Thus forming the product steel cage, which is the working principle of the bored pile steel cage roll welding machine, that is, the "steel cage forming machine".
Advantages of steel cage welder:
1, PLC automatic control, touch screen adjustment, high degree of automation.
2, Moving disk walking and carriage return are automatic walking, improve the degree of equipment automation.
3, Stirrup does not need to lap, compared with manual work to save one percent of the material, reducing the construction cost.
Our company was founded in 2016. We focus on the research and development as well as the production of steel bar processing equipment. We can customize the equipment according to the customer's requirements. We offer excellent pre-sale and after-sale services with the engineer to the customer's site to debug the equipment. Our customers are spread all over the world. We deliver our machine both by sea and train. We warmly welcome interested customers to visit and inspect our company and offer your valuable suggestions.
Automatic Steel Bar Cage Welder
Parameters
|
Steel cage pile diameter |
Φ350~800 |
|
Cage length |
12m,Larger than 12 meters can be customized |
|
Diameter of main bar of steel cage |
Φ16~40, Customizable |
|
Diameter of winding bar of steel cage |
Φ6~12, Customizable |
|
Distance between two winding bars |
≤300mm |
|
Hydraulic pressure |
≤16MPa |
|
Gas pressure |
≤0.8MPa,Automatic welding gas |
|
Automatic welding type |
Two guns on the side, Two guns on top can be customized |
|
Equipment power |
Power 60KW,Welding 30KW |
|
Number of operators |
2 persons |
|
Production efficiency |
8 sections/10h,12m/section |
|
Occupied area |
28m×5m |
How to operate CNC steel cage hob-welder to improve work efficiency? The appearance of CNC steel cage roll welding machine has replaced the manual processing method, and the steel cage roll welding machine has improved the work efficiency and ensured the quality of products. So how to operate to improve its efficiency?
1. Before using the equipment, check whether the performance is good and whether the workbench and bending machine are level.
2. Before work, prepare each mandrel tool stop, adjust the mandrel forming shaft and iron stop shaft according to regulations.
3. Check whether the block and turntable of the mandrel are damaged. If there is a problem, deal with it in time.
4. Before processing, the machine is idled for a few minutes before the end of the steel bar needs to be bent is inserted in the gap fixed in the turntable.
5. The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed to ensure that the side that blocks the steel bar can be started.
6. When processing steel bars, it is forbidden to change the diameter, number, speed, etc., of the steel cage hob-welder equipment.
Hot Tags: automatic steel bar cage welder, China automatic steel bar cage welder manufacturers, suppliers, factory
