Parameters
| Size | 920×770×880mm |
| Weight | 150kg±5 |
| Voltage | 380V |
| Power | 2.2KW-2 |
| Processing Range |
Ⅲ Deformed steel bar≤18mm Common straight carbon steel≤20mm |
Safety Precautions
1. Check the mandrel, stop block, turntable should not be damaged and cracked, the protective cover is tight and reliable, and the operation can be confirmed by the normal operation of the empty machine.
2. During operation, insert the end of the steel bar to be bent into the gap fixed by the turntable, and fix the other end close to the fuselage and press it tightly with your hand, check that the fuselage is fixed, and it is really installed on the side that blocks the steel bar.
3. During the operation, it is forbidden to change the mandrel and change the Angle and speed regulation, and it is not allowed to refuel or clear.
4. When bending steel bars, it is strictly prohibited to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine.
5. When bending high hardness or low alloy steel bars, the maximum limit diameter should be changed according to the mechanical nameplate, and the corresponding mandrel should be replaced.
6. It is strictly prohibited to stand within the working radius of the curved steel bar and the fuselage without a fixed side. Bent semi-finished products should be stacked neatly, bent hooks should not face up.
7. When turning the turntable, it must be done after stopping.
8. Finish the work, clean up the site, maintain the machinery, power off and lock the box.
9. If safety hazards are found on the construction site, report to the project department immediately, and the construction can only be carried out after the rectification of safety hazards is completed.
Hot Tags: max diameter 20mm steel bar bender, China max diameter 20mm steel bar bender manufacturers, suppliers, factory, Diameter 20mm Steel Bar Bending Mahine, Max Diameter 20mm Rebar Bender, 20mm steel bar stirrup bending machine, Max Diameter 20mm Rebar Bending Mahine
