Max Diameter 20mm Rebar Bender

 

Size	920×770×880mm
Weight	150kg±5
Voltage	380V
Power	2.2KW-2
Processing Range	Ⅲ Deformed steel bar≤18mm Common straight carbon steel≤20mm

 

Tips: Prevent object strike, mechanical injury, electric shock, fire, occupational disease and other hazards.

 

 

1. Equipment operators should be familiar with the structure, performance and principle of the equipment before they can operate the equipment.
2. Before the operation of the equipment carefully check the equipment conditions, safety conditions, to confirm that the equipment can start the equipment after no problems.
3. Before the equipment starts, check whether the relevant circuit is abnormal, especially the connection of the PE line, and close the main power switch after confirming that there is no anomaly.
4. Close the power switch on the operating table, check whether there is an alarm display, if there is an alarm indication, according to the alarm screen fault prompt to eliminate the alarm fault.

First turn on the main power supply of the electric control cabinet.
Turn on the system.
In the middle of the manual/Auto/Edit button, this position begins to edit the pattern for the edit state.
When there is an emergency or wrong action, you must press the emergency stop button in time, and the emergency stop display will open.
Resolve the error according to the alarm prompt on the display screen and press the reset button to resume the preparation state.
A callback is required when the overstop button is pressed or when the switch is made from another state to the automatic state.

Note: When the fault in the automatic work is solved, the structure can not be realized to return to the initial position, to press the emergency stop and reset the parameter.

 

Hot Tags: max diameter 20mm rebar bender, China max diameter 20mm rebar bender manufacturers, suppliers, factory, Max Diameter 20mm Rebar Bending Mahine, Max Diameter 20mm Rebar Bender, 20mm steel bar stirrup bending machine, Diameter 20mm Steel Bar Bending Mahine