Horizontal Steel Bar Bending Center

Anti-noise transmission roller table design provides safety and environmental protection. The main machine adopts no-backlash meshing technology for accurate positioning and no noise. Large stainless steel panel design makes the curved steel bar more stable. The design technology of automatic blanking mechanism saves time and effort. The crank type steel bar lifting and transferring mechanism is set up to provide maximum convenience for the operator's work. Inclined face structure, makes loading and unloading operation convenient and safe.

Technical Parameters

Bending bar diameter

10mm

12mm

14mm

16mm

18mm

20mm

22mm

25mm

28mm

32mm

40mm

50mm

Bending quantity

Angular bending velocity

48°~72°/s

Moving speed of the bending machine

0.5~1m/s

Power supply

380V 50Hz

Total power

27.7KW

Actual power consumption

12kw/h

Maximum bending Angle

Upbend：0~180°

Minimum curved edge size

Φ12mm

Upbend：0~-120°

Φ1100mm

Minimum length of bent edge

80mm

Maximum curved edge size

10000mm

Minimum bending bar length

1250mm

Compound bend (up or down)

Φ10~32mm

Single bend

Φ36~50mm

Video

Operation Procedure

First, check the equipment

Before starting to operate the rebar bend center, check the equipment:

1. Check whether the power cable is properly connected and whether the cable is worn or broken.

2. Check whether all parts of the equipment are complete and firm, especially the bending mold and tool parts.

3. Check whether the operating environment of the device meets requirements, such as temperature and humidity.

Second, prepare materials

Before beginning to bend the rebar, prepare the following materials:

1. Steel bar raw materials: Select the appropriate type and length of steel bar according to the design requirements.

2. Auxiliary materials: such as fixture, support frame, etc.

Third, loading steel

The steel bar raw materials are placed on the workbench of the bending center of the steel bar, and the appropriate fixture is selected to fix the steel bar on the workbench.