Horizontal Rebar Bending Center

Anti-noise transmission roller table design provides safety and environmental protection. The main machine adopts no-backlash meshing technology for accurate positioning and no noise. Large stainless steel panel design makes the curved steel bar more stable. The design technology of automatic blanking mechanism saves time and effort. The crank type steel bar lifting and transferring mechanism is set up to provide maximum convenience for the operator's work. Inclined face structure, makes loading and unloading operation convenient and safe.

Technical Parameters

Bending bar diameter

10mm

12mm

14mm

16mm

18mm

20mm

22mm

25mm

28mm

32mm

40mm

50mm

Bending quantity

Angular bending velocity

48°~72°/s

Moving speed of the bending machine

0.5~1m/s

Power supply

380V 50Hz

Total power

27.7KW

Actual power consumption

12kw/h

Maximum bending Angle

Upbend：0~180°

Minimum curved edge size

Φ12mm

Upbend：0~-120°

Φ1100mm

Minimum length of bent edge

80mm

Maximum curved edge size

10000mm

Minimum bending bar length

1250mm

Compound bend (up or down)

Φ10~32mm

Single bend

Φ36~50mm

Video

How To Use Cnc Bar Bending Center

1. Check whether the performance is good before using the equipment, and whether the workbench and the bending center of the CNC steel bar are kept level.
2. Before work, prepare each mandrel tool stop, adjust the mandrel forming shaft, iron stop shaft, etc.
3. Check the mandrel block, turntable, etc., whether there is damage, such as problems, timely treatment.
4. Before processing, the CNC steel bar bending center should be idled for a few minutes before the steel bar can be bent into the gap fixed in the turntable.
5. The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed to ensure that the side that blocks the steel bar can be started.
6. When machining steel bars in the CNC steel bar bending center, it is forbidden to change the diameter, number of bars, speed, etc.