CNC Steel Bar Sawing Threading And Grinding Production Line
The equipment implements sawing, peeling, threading, grinding and other processing processes of bar reinforcement. It saves labor, and the equipment is stable with low maintenance costs. It is widely used in highway, high-speed railway, rail transit, bridge, electric power, water conservancy and other projects.
Operating quality procedure
1. Before the operation of the steel bar shear line, the appropriate blade specifications and models should be selected as required.
2. Before operation, the blade should be adjusted and calibrated to ensure that the cutting quality meets the requirements.
3. A stable cutting speed and rhythm should be maintained during the operation to avoid burrs or damage.
4. After each cutting, the residue of the cutting part should be cleaned in time to keep the cutting line clean.
5. After the shear line operation is completed, the equipment should be regularly maintained and maintained to ensure its normal working condition.
Efficiency improvement procedures
1. Before cutting the steel bar, prepare the required steel bars and other auxiliary tools in advance.
2. During operation, the cutting order should be arranged reasonably, and the cutting path should be optimized to improve the operation efficiency.
3. In the process of operation, attention should be paid to the reasonable allocation and utilization of human resources to avoid waste or duplication of labor.
4. Try to use mechanized equipment and automated processes to improve the efficiency and quality of operations.
5. After the cutting line operation is finished, the experience should be summarized in time to find out the shortcomings and make improvements.
|
Bar diameter |
16 |
20 |
22 |
25 |
28 |
32 |
35 |
40 |
45 |
50 |
|
Sawing quantity |
35 |
30 |
25 |
22 |
20 |
15 |
13 |
12 |
10 |
8 |
1,
Sawing line Model：600
Sawing width(mm): 600
Sawing diameter range(mm): Φ16~50
Steel bar transfer speed(m/min): 90
Bar length range(m): 1.5~12
Size error: ±1mm/m
Sawing feed speed：Steplessly adjustment
Clamping mode：Hydraulic
Main motor power(KW): 4
Oil pump motor power(KW): 3
Cooling pump power(W): 60
Input/output motor power(W): 3
Motor power of stock holder(KW)：3
Total installed power(KW)：19
Sawing line dimensions(mm): 29000*3800*2450
2,
Threading line model: 40-3/40-5
Machinable steel bar diameter range：6~40mm
Machinable steel bar length range：2000~12000mm
Maximum length of threading: 80mm
Total power：26KW
Threading line dimensions：15000×2500mm (40-3)
Steel bar transportation speed: 50m/min
Gas path pressure：0.8Mpa
Hot Tags: CNC Steel Bar Sawing Threading And Grinding Production Line, China CNC Steel Bar Sawing Threading And Grinding Production Line manufacturers, suppliers, factory
