The equipment is an auxiliary production equipment for bar reinforcement to realize the batch size cutting of bars, easily meet the matching of subsequent bending circle, bending arc, bending hoop and other procedures that require the size of bars, widely used in construction, highway, high-speed rail, tunnel, water conservancy, nuclear power plant and other industries.
Video
Products Description
|
Bar diameter (mm) |
10 |
12 |
16 |
20 |
22 |
25 |
28 |
32 |
35 |
38 |
|
Shear bar quantity(HRB400) |
10 |
8 |
6 |
4 |
3 |
3 |
2 |
1 |
1 |
1 |
|
Shear frequency |
20 times/min |
|||||||||
|
Effective blade width |
200mm |
|||||||||
|
Bar transfer speed |
50m/min |
|||||||||
|
Shearable bar length |
750~12000mm |
|||||||||
|
Size error |
±5mm |
|||||||||
|
Minimum manual shear size |
750mm |
|||||||||
|
Minimum automatic shear size |
1200mm |
|||||||||
|
Bar diameter |
Φ10~38mm |
|||||||||
|
Shear line total power |
14KW Including air compressor |
|||||||||
|
Bar receiving bin |
3*2 |
|||||||||
|
Average power consumption |
8KW/H |
|||||||||
|
Total air consumption |
1m³/min |
|||||||||
|
Equipment floor space |
26m×3.2m×1.5m |
|||||||||
CNC steel bar shear line is a kind of automatic integrated machine mainly for large diameter and high strength steel bar cutting equipment, which can automatically cut the steel bar into the required length according to the need, and classify and store the bar. Used in construction, highway and other industries, can complete different lengths of steel bar cutting work, for many specifications, batch of small steel bar cutting work is also applicable.
Common faults and troubleshooting methods
1. The system does not work: the host and the control cabinet are not connected, check whether the connection and cable are firmly connected
2. The system is in the alarm state: check whether the induction position and induction switch are damaged, the emergency stop button is pressed, and the emergency stop control button is restored
3. The actuator does not work: components and valves are damaged or the air pressure is not enough, replace the components or valves, increase the gas pressure, the control line is in poor contact or disconnected, check the faulty line, the induction switch is loose, check the induction switch
4. Motor alarm: overheating, overload, according to the appearance of the signal processing, stop working, cooling or reduce the load
5. Steel bar slip, roller stop: check the connection between the chain and the roller and the bearing rotation
6. The steel bar shear is constant: the blade is damaged. Replace the blade, and the gap between the moving and fixed blades is too large to adjust the gap
Hot Tags: hydraulic steel bar cutting line, China hydraulic steel bar cutting line manufacturers, suppliers, factory, Hydraulic Steel Bar Cutting Line, Hydraulic Rebar Cut Line, Hydraulic Reinforcement Cut Line, Hydraulic Reinforcement Shear Line
