1. There are many kinds of steel bars that can be processed, with diameters ranging from 6mm to 16mm, so the application range is wide.
2, with high accuracy, the steel bar processing length tolerance is controlled within +/ 1mm, while the processing Angle error does not exceed +/ 1degree. This machining accuracy is much more than manual operation.
3, the scope of work is large. Before feeding the steel bar, whether it is placed regularly (such as a disk) or irregularly, it can be fed and straightened smoothly.
4, can process hot rolled and cold drawn steel bars, whether it is in the form of a disc.
5, ensure the effective utilization of steel bars. Because it is controlled by computer, the amount of feed is processed, so that the steel bar has been used to the maximum.
6, the feed part is controlled by servo motor, which can replace steel bars of different diameters within one minute, greatly reducing the time consumed by replacing steel bars.
7, the use of computers to control the processing of steel bars. To change the shape of the steel bar machining, simply select the desired machining type on the control screen. If you need to add or remove a certain machining shape, you can modify the software to complete.
8, in addition to the above several advantages, it also has a significant feature, that is, the cost is low, compared with similar foreign products, the price is only one quarter of their, conducive to the promotion and sales of products.
