Small steel cage welding machine with double guns automatic welding is favored by domestic and foreign customers for its excellent performance and stable quality.

Parameters

Steel cage pile diameter	Φ350~800
Cage length	12m,Larger than 12 meters can be customized
Diameter of main bar of steel cage	Φ16~40,Customizable
Diameter of winding bar of steel cage	Φ6~12,Customizable
Distance between two winding bars	≤300mm
Hydraulic pressure	≤16MPa
Gas pressure	≤0.8MPa,Automatic welding gas
Automatic welding type	Two guns on the side, Two guns on top can be customized
Equipment power	Power 60KW,Welding 30KW
Number of operators	2 persons
Production efficiency	8sections/10h,12m/section
Occupied area	28m×5m

How to operate CNC steel cage hob-welder to improve work efficiency? The appearance of CNC steel cage roll welding machine has replaced the manual processing method, and the steel cage roll welding machine has improved the work efficiency and ensured the quality of products. So how to operate to improve its efficiency?

1. Before using the equipment, check whether the performance is good and whether the workbench and bending machine are level.

2. Before work, prepare each mandrel tool stop, adjust the mandrel forming shaft and iron stop shaft according to regulations.

3. Check whether the block and turntable of the mandrel are damaged. If there is a problem, deal with it in time.

4. Before processing, the machine is idled for a few minutes before the end of the steel bar needs to be bent is inserted in the gap fixed in the turntable.

5. The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed to ensure that the side that blocks the steel bar can be started.

6. When processing steel bars, it is forbidden to change the diameter, number, speed, etc., of the steel cage hob-welder equipment.