In the field of construction engineering, hoop bending machine is a vital steel bar processing equipment. Understanding its technical requirements will help ensure the normal operation and processing quality of the equipment.
First of all, in the design of key components, a spring mechanism should be provided at the joint of the oil cylinder, so that flexible compression can be achieved under the driving state of the steel bar to avoid damage to the steel bar ribs. The fixed mounting plates of all rollers must be integral welded parts, and the rigidity is good after aging treatment, which can ensure the installation accuracy of the rollers.
In terms of power and control, pneumatic drive shearing should be adopted, which has large shearing force, stable and reliable, and occupies small space. The bending die and bending head adopt the integral cast steel process, which has sufficient integrity and rigidity, and can effectively improve the processing accuracy and stability. At the same time, the lubricating oil adopts a centralized oil supply system to avoid the disadvantages of single oil injection in key parts. The air compressor is equipped with an accumulator and a cooling system to ensure continuous operation.
In terms of processing performance, the hoop bending machine uses a power servo motor to bend the steel bar in both directions in forward and reverse rotation. The central axis can be replaced and is easy to maintain, and intelligent control is adopted. It can bend hooks and hoops for cold-rolled ribbed steel bars, hot-rolled grade 3 steel bars and other types of steel bars. It has fast bending speed, low energy consumption, no rib damage, low noise and is light and flexible to operate. Two-person operation makes it widely used in large construction sites and steel processing plants, with high output and accurate sizing, suitable for large-scale and factory operations.
In terms of automation function, the hoop bending machine should have a real-time control system, which can adjust the feeding speed, bending speed and bending angle at will during the operation of the equipment. It should also be equipped with a standard library with automatic storage and call functions for easy operation.
In addition, there are strict requirements for the use and maintenance of steel hoop bending machines. Before operation, check the performance of the equipment to ensure that all components are intact; comply with regulations during operation to prevent accidents; and do a good job of maintenance and troubleshooting on a daily basis to extend the service life of the equipment and ensure production efficiency and product quality.
