CNC Steel Bar Vertical Bending Center
It is a traditional bar bending equipment with manual assist loading and unloading. It has experienced many years of market verification with stable production, simple operation, high quality and low price.
The integrated structure of the whole machine makes the transshipment convenient, no fixed. All mechanical transmission structure is with low noise and convenient maintenance. Mechanical-electrical integration design has advanced control module. Integrated design of the head moving mechanism is built into the box with compact structure. The working surface is vertical. Feeding and unloading operation is convenient and safe. It is easy to measure the workpiece dimensions. The equipment has the test function. No waste is generated when the steel bar is bent. Two-way automatic bending of steel bars can be achieved. The curved steel bar has a maximum diameter of ϕ32.
It is a traditional bar bending equipment with manual assist loading and unloading. It has experienced many years of market verification with stable production, simple operation, high quality and low price.
Safety maintenance procedure
1. When the machine is being maintained, repaired, cleaned or adjusted, a warning sign of "Under repair, no operation" should be hung (placed) on the operating table to prevent injury to the human body and equipment caused by inadverdial operation.
2. To repair pneumatic components, power off, turn off the air source, and discharge the remaining compressed air in the pipeline. At the same time, a warning sign of "Under repair, No operation" should be hung (placed) on the operating platform before maintenance can be carried out to avoid personal equipment injury.
3. In order to ensure the normal use of pneumatic components and extend the service life, the compressed air in the gas pipe should be filtered and dried, and the water should be discharged regularly in the pipeline.
|
Equipment Model |
LYWQ-32 |
|||||||||
|
Bar diameter |
10mm |
12mm |
14mm |
16mm |
18mm |
20mm |
22mm |
25mm |
28mm |
32mm |
|
Bending quantity |
7 |
6 |
5 |
4 |
3 |
3 |
2 |
2 |
1 |
1 |
|
Rate of bending |
8r/min |
|||||||||
|
Head movement speed |
1m/s |
|||||||||
|
Equipment power |
12.6KW |
|||||||||
|
Number of operators |
2 persons |
|||||||||
|
Occupied area |
12m×2.2m |
|||||||||
Hot Tags: CNC Steel Bar Vertical Bending Center, China CNC Steel Bar Vertical Bending Center manufacturers, suppliers, factory
