Semi-Auto Steel Bar Mesh Welding Machine

Model: XGWJ-220
Welding wire diameter range: 3.5-8.0mm
Point of weld: 8 of them
Welding speed: 30-65 row/min，Speed adjustable
Welding power: Stepping motor
Power: 4kw With automatic brake
Welding transformer: 120KVA*water-cooling
Voltage: 380V
Diagonal error of the mesh: <2mm
Specification of the machine: 2.25*4.9*1.45m
Weight: 2.0T

Video

Technical Parameters

Model	XGWJ-220
Welding wire diameter range	3.5-8.0mm
Point of weld	8 of them
Welding speed	30-65 row/min,Speed adjustable
Welding power	Stepping motor
Power	4kw With automatic brake
Welding transformer	120KVA*water-cooling
Voltage	380V
Diagonal error of the mesh	<2mm
Specification of the machine	2.254.91.45m
Weight	2.0T

Before operating the equipment, you must wear personal protective equipment, such as safety helmets and safety shoes.

After the welding is completed, check the quality of the welding points and make the necessary repairs.

Equipment Maintenance

1. After the end of work every day, clean and inspect the equipment to ensure that all parts of the equipment are not damaged or loose.

2. Periodically check the electrical parts of the equipment, such as switches and wiring, to ensure that they work normally.

Fault phenomenon: The three-phase power supply of the steel welding mesh machine is normal, and the stepper motor of the controller is not working (the power indicator is not bright or the brightness is not enough).

Cause of the fault and elimination: for welding equipment that requires a special neutral line, the reason for the above fault is that under the premise of normal three-phase power supply, if the neutral line of the power supply is not connected or has poor contact, it will make the cooling fan, stepper motor controller, and electromagnetic governor of the speed regulating motor can not work normally, as long as the neutral line is connected to solve the problem.

Sometimes a certain contact of the control cabinet power control switch is not in good contact or the control safety is burned out, which requires a professional electrician to eliminate according to the electrical schematic diagram.