Steel Bar Stirrup Cage Forming Robot
The equipment is an automatic welding and forming equipment for special-shaped stirrup steel cage. It is a perfect alternative to manual binding of stirrup cages. The minimum main bar spacing can be 100mm, and the maximum can be customized according to customers.
The steel cage forming machine is a special equipment used to produce the steel cage required in the construction of concrete piles, Bridges, and other construction projects. The correct operation of the steel cage forming machine is very important to ensure the quality and production efficiency of the steel cage.
Preparatory work
1. Confirm the equipment status: Before the operator starts to operate the steel cage forming machine, it is necessary to check whether the equipment is in a normal state, such as whether the power is connected and whether the lubricating oil is sufficient.
2. Prepare raw materials: Prepare the required steel bars, welding wire and other raw materials, and classify and sort according to the production requirements.
3. Safety protection: The operator needs to wear protective equipment, such as safety helmet, gloves, goggles, etc., to ensure the safety during operation.
Start the steel bar cage forming machine correctly according to the requirements of the equipment operation manual to ensure the normal operation of the equipment.
The operator must have relevant job training and qualification certificates, and understand the basic principles and operating points of the steel cage forming machine.
Parameters
|
Cage length |
6m,Customizable |
|
Winding bar type |
Stirrup |
|
Main bar type |
Bar |
|
Main bar number |
3-6pc,Customizable |
|
Diameter of main bar |
10-20mm, Customizable |
|
Stirrup diameter |
6-12mm, Customizable |
|
Stirrup profile |
Triangles, rectangles, special shapes |
|
Stirrup spacing |
≥30mm |
|
Minimum distance between main bars |
100mm |
|
Welding manner |
Gas shielded welding |
|
Gas pressure |
≤0.8MPa |
|
Power |
14.5KW |
|
Welding power |
100KW |
|
Number of operators |
1 person |
|
Production efficiency |
24 sections/10h,6m/section |
|
Occupied area |
16m×3m |
Hot Tags: Steel Bar Stirrup Cage Forming Robot, China Steel Bar Stirrup Cage Forming Robot manufacturers, suppliers, factory
