Steel bar stirrup cage form machine
The equipment is an automatic welding and forming equipment for special-shaped stirrup steel cage. It is a perfect alternative to manual binding of stirrup cages. The minimum main bar spacing can be 100mm, and the maximum can be customized according to customers.
Preparation before operation:
Ensure the normal operation of the power supply, transmission system and hydraulic system of the steel cage forming machine, and carry out the necessary inspection and maintenance.
Operation process
1. Start the equipment: according to the requirements of the equipment operation manual, correctly start the steel cage forming machine to ensure the normal operation of the equipment.
2. Adjust the parameters: according to the production requirements, adjust the parameters of the equipment, such as welding current, speed, etc., to ensure the quality of the steel cage.
3. Start production: Put the prepared steel bars into the equipment and operate according to the requirements to form the steel cage.
Quality control
1. Check the product: After the production is completed, check the quality of the steel cage in time, such as whether the welding is strong and whether the size meets the requirements.
2. Quality records: Record each batch of steel bars produced, including production date, production quantity, quality inspection results, etc., for verification.
3. Troubleshooting: If a device fault or product quality problem is found during operation, stop the machine and handle it in time, and record the fault cause and troubleshooting process.
Our company was founded in 2016. We focus on the research and development as well as the production of steel bar processing equipment. We can customize the equipment according to the customer's requirements. We offer excellent pre-sale and after-sale services with the engineer to the customer's site to debug the equipment. Our customers are spread all over the world. We deliver our machine both by sea and train. We warmly welcome interested customers to visit and inspect our company and offer your valuable suggestions.
Parameters
|
Cage length |
6m,Customizable |
|
Winding bar type |
Stirrup |
|
Main bar type |
Bar |
|
Main bar number |
3-6pc,Customizable |
|
Diameter of main bar |
10-20mm, Customizable |
|
Stirrup diameter |
6-12mm, Customizable |
|
Stirrup profile |
Triangles, rectangles, special shapes |
|
Stirrup spacing |
≥30mm |
|
Minimum distance between main bars |
100mm |
|
Welding manner |
Gas shielded welding |
|
Gas pressure |
≤0.8MPa |
|
Power |
14.5KW |
|
Welding power |
100KW |
|
Number of operators |
1 person |
|
Production efficiency |
24 sections/10h,6m/section |
|
Occupied area |
16m×3m |
Hot Tags: steel bar stirrup cage form machine, China steel bar stirrup cage form machine manufacturers, suppliers, factory
