Automatic Rebar Mesh Welder

Model:XGWJ-220
Welding wire diameter range:3.5-8.0mm
Point of weld:8 of them
Welding speed:30-65 row/min，Speed adjustable
Welding power:Stepping motor
Power:4kw With automatic brake
Welding transformer:120KVA*water-cooling
Voltage:380V
Diagonal error of the mesh:<2mm
Specification of the machine:2.25*4.9*1.45m
Weight:2.0T

Video

Technical Parameters

Model	XGWJ-220
Welding wire diameter range	3.5-8.0mm
Point of weld	8 of them
Welding speed	30-65 row/min,Speed adjustable
Welding power	Stepping motor
Power	4kw With automatic brake
Welding transformer	120KVA*water-cooling
Voltage	380V
Diagonal error of the mesh	<2mm
Specification of the machine	2.254.91.45m
Weight	2.0T

Equipment Preparation

1. Check whether the device is in good condition and all parts are fixed firmly.
2. Prepare welding materials, including mesh and wire.
3. Prepare necessary tools, such as a shearing machine and cleaning brush.

Equipment Operation

1. Turn on the main power switch to start the device.
2. Adjust the height of the operating surface of the equipment so that it is compatible with the height of the operator
3. Place the steel mesh on the work table of the welding machine and adjust the position and tension of the steel mesh to ensure that it will not move during the welding process.
4. Load the welding wire into the welding wire machine and control the supply speed of the welding wire through the electronic control unit.

Equipment maintenance

1. After the end of work every day, clean and inspect the equipment to ensure that all parts of the equipment are not damaged or loose.
2. Periodically check the electrical parts of the equipment, such as switches and wiring, to ensure that they work normally.
3. Regularly maintain the welding machine, such as replacing electrodes, cleaning welding, etc.
4. Ensure that the working environment around the device is dry, clean, and away from flammable materials.

Safe operation

1. Before operating the equipment, you must wear personal protective equipment, such as safety helmets and safety shoes.

2. When operating, keep sober and do not drink or smoke.