Serial number	Denomination Parameter	Parameter
1	Device Model	LYQZD-GJL02
2	Device Name	Automatic Reinforcement Cage Welding Center
3	Rebar cage diameter	φ 1200mm-φ2500mm
4	Diameter of main reinforcement cage	φ 18mm-φ32mm
5	Rebar cage diameter	φ8mm, φ 10mm, φ 12mm, φ 14mm,
6	Main reinforcement type of steel cage	Single main reinforcement, (double main reinforcement-customizable)
7	Steel Cage Wire Wrap Type	Single winding and double winding
8	Rebar cage spacing	70mm-300mm

The Automatic Reinforcement Cage Welding Center is a steel cage welding equipment with independent intellectual property rights developed by our company. The equipment is mainly used in subways, bridges, building construction, airports, highways, and foundations.

This equipment consists of a main reinforcement automatic feeding system, a main reinforcement detection and positioning welding system, a steel cage welding system, and a steel cage unloading system. No human intervention is required during the welding process. The welding efficiency is high. The welding time of a main reinforcement is less than 35 seconds. The welding time of the welding point can be configured and saved according to the process, which saves personnel and greatly improves the welding efficiency. It can ensure continuous and rapid welding. The steel cage skeleton of 9 meters to 12 meters can generally be welded in 20 minutes, and the steel cage can generally be wound and welded in 25 minutes.

Equipment Use Environment And Conditions

Products Description

No.	Name	Parameter Attribute
1	Power supply	380V±10%, 50Hz±1, 3-phase 5-wire system
2	Ambient temperature	-10-60°C
3	Humidity	≤85%
4	Continuous working time	≤24h
5	Power Equipment power:	30KW; welding power: 100KW
6	Compressed gas pressure	≥0.6MPa
7	Shielding gas Mixed gas	(80%Ar+20%CO2)
8	Welding wire	1.2mm welding wire