Automatic Steel Bar Cage Welding Workstation
It's the leading industry automatic steel cage production equipment with continuous innovation and optimization. The main bar and inner ring are welded automatically. The welds are inspected 100% automatically. It automatically memorizes and matches the length and position of the main bar. The winding bar and main bar are automatically welded by the double guns. Different cage sizes are automatically switched. The steel cage is automatically released and transferred. It is intelligent, stable and efficient.
The Automatic Reinforcement Cage Welding Center is a steel cage welding equipment with independent intellectual property rights developed by our company. The equipment is mainly used in subways, bridges, building construction, airports, highways, and foundations.
This equipment consists of a main reinforcement automatic feeding system, a main reinforcement detection and positioning welding system, a steel cage welding system, and a steel cage unloading system. No human intervention is required during the welding process. The welding efficiency is high. The welding time of a main reinforcement is less than 35 seconds. The welding time of the welding point can be configured and saved according to the process, which saves personnel and greatly improves the welding efficiency. It can ensure continuous and rapid welding. The steel cage skeleton of 9 meters to 12 meters can generally be welded in 20 minutes, and the steel cage can generally be wound and welded in 25 minutes.
Our company was founded in 2016. We focus on the research and development as well as the production of steel bar processing equipment. We can customize the equipment according to the customer's requirements. We offer excellent pre-sale and after-sale services with the engineer to the customer's site to debug the equipment. Our customers are spread all over the world. We deliver our machine both by sea and train. We warmly welcome interested customers to visit and inspect our company and offer your valuable suggestions.
Parameters
Equipment Model：LYZD-GJL2500
|
Steel cage pile diameter |
Φ700~2500 |
|
Cage length |
12m |
|
Diameter of main bar of steel cage |
Φ18~40 |
|
Diameter of winding bar of steel cage |
Φ8~16 |
|
Steel cage main bar type |
Single/Double (Double main bar is customized) |
|
Steel cage winding bar type |
Single/Double |
|
Distance between two winding bars |
≤300mm |
|
Hydraulic pressure |
≤16MPa,Gas pressure：≤0.8MPa |
|
Equipment power |
Power 30KW,Welding 100KW |
|
Number of operators |
1 Person |
|
Production efficiency |
13 sections/10h,12m/section |
|
Occupied area |
30m×8.5m |
Hot Tags: automatic steel bar cage welding workstation, China automatic steel bar cage welding workstation manufacturers, suppliers, factory
