The steel bar cage production equipment controlled by PLC ended the history of manual binding of steel cages. It's widely used in highway, high-speed railway, rail transit, power engineering, water conservancy projects and other projects. The equipment is mature, stable and easy to operate. Customers can choose the matching double gun automatic welding manipulator.
|
Model |
LYGH-1500 |
LYGH-1800 |
LYGH-2000 |
LYGH-2200 |
LYGH-2500 |
LYGH-3000 |
|
Steel cage pile diameter |
500~1500 |
500~1800 |
600~2000 |
600~2200 |
800~2500 |
800~3000 |
|
Equipment power |
16KW |
18KW |
23KW |
23KW |
25KW |
38KW |
|
Occupied area(No side automatic welding) |
28m×6m |
28m×6m |
28m×6.5m |
28m×7m |
28m×9m |
28m×11m |
|
Occupied area(Including side automatic welding) |
28m×8.5m |
28m×8.5m |
28m×9m |
28m×9.5m |
28m×11.5m |
28m×13.5m |
|
Cage length |
12m Customizable |
|||||
|
Diameter of main bar of steel cage |
Φ16~50 |
|||||
|
Diameter of winding bar of steel cage |
Φ5~16 |
|||||
|
Welding method of the winding bar |
Welding robot or manual |
|||||
|
Distance between two winding bars |
≤300mm |
|||||
|
Hydraulic pressure |
≤16MPa |
|||||
|
Gas pressure |
≤0.8MPa Automatic welding gas |
|||||
|
Welding power |
30KW Double guns automatic welding |
|||||
|
Number of operators |
1-2 persons Double guns automatic welding 2-4 persons Manual welding |
|||||
|
Production efficiency |
8 sections/10h Refer to the actual site environment |
|||||
How to operate CNC steel cage hob-welder to improve work efficiency? The appearance of CNC steel cage hobbing welding machine has replaced the manual processing method, and the steel cage hobbing welding machine has improved the work efficiency and ensured the quality of products. So how to operate to improve its efficiency?
1. Before using the equipment, check whether the performance is good and whether the workbench and bending machine are level.
2. Before work, prepare each mandrel tool stop, adjust the mandrel forming shaft and iron stop shaft according to regulations.
3. Check whether the block and turntable of the mandrel are damaged. If there is a problem, deal with it in time.
4. Before processing, the machine is idled for a few minutes before the end of the steel bar needs to be bent is inserted in the gap fixed in the turntable.
5. The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed to ensure that the side that blocks the steel bar can be started.
6. When processing steel bars, it is forbidden to change the diameter, number, speed, etc., of the steel cage hob-welder equipment.
Hot Tags: Steel Bar Cage Weld Machine, China Steel Bar Cage Weld Machine manufacturers, suppliers, factory
