In the construction, highway and other industries, steel bar shearing line plays an important role. To ensure its efficient and stable operation, daily maintenance is essential. The following are its main maintenance methods.
Inspection before starting the machine is the basis. Check the power supply and air source of the equipment to ensure normal supply; pay attention to the lubrication status of the reducer to keep it in good lubrication. After starting the machine, wait for the equipment to enter the normal working state, pay attention to the operating state during operation, and the cutting head needs to be raised to the position before operation.
Daily cleaning is indispensable. During the shearing process, if impurities such as dust, grease and dirt on the surface of the steel bar are not removed in time, it will affect the efficiency of the equipment and even damage the equipment. Therefore, before processing new steel bars, use a cleaning cloth or brush to clean the surface of the equipment and the surface of the steel bar.
The adjustment of the cutter head should be carried out according to the steel bars of different specifications. Use tools to adjust the distance of the cutter head to the required position, and adjust the cutting angle at the same time to ensure the quality of steel bar cutting.
When the equipment is running, the operator must have relevant skills and be trained. Wear labor protection equipment correctly, do not wear loose clothing and accessories, and do not distract attention. When feeding manually, do not hold the feeding chain with your hands. At the same time, pay attention to the equipment. If the screws are loose during vibration, the oil-water separator is abnormal, the air compressor pressure switch is abnormal, etc., they should be handled in time.
In addition, deep maintenance is required every once in a while. For example, after the machine has been running for 1-2 months, the circuit breaker and other parts should be re-tightened, and the oil of each component should be checked and replenished; the lubricating oil nozzle should be oiled every week, and the dust in the electrical cabinet should be removed. During the equipment maintenance process, strictly abide by various precautions, such as qualified training before operation, and it is strictly forbidden to flush electrical equipment with water.
Do a good job in daily maintenance of the steel bar shearing line, which can not only extend the service life of the equipment, but also ensure the smooth progress of production, and provide strong guarantee for the stable development of related industries.
